Bosch Dishwasher Spares

bosch dishwasher spares

Bosch are one of the most popular dishwasher suppliers in the UK. This means there is a wealth of information available should you encounter any problems and spares are widely available. Bosch appliances are known for their great reliability but, like any dishwasher, you will unfortunately encounter problems occasionally. Below are some Bosch dishwasher troubleshooting tips and some suggestions on what you can do to rectify them.

Running a Test Cycle

Most Bosch dishwashers have a diagnostic test cycle which can be run as a troubleshooting measure. To start a test cycle, press and hold the WASH and ECO buttons (may vary between models) and press the dishwashers ON/OFF button. Let go of the buttons and the lights above them should flash. You can now check the status of each dishwasher program by pressing the programs button. Now, to start the full test, press the WASH and ECO buttons again. When the dishwasher cycle has ended, the display should show one of the following error codes -

0 - No errors detected.
1 - Aqua (water) sensor fault.
2 - Heating fault.
4 - Filling fault (can also appear as F during normal cycle).
8 - Temperature sensor fault.

In addition, if the water level sensor has failed, the display will show fault code 4 and the dishwasher will keep filling and draining and the test won't be completed. If the flow switch has failed, the display will show 0, water won't heat to the required temperature and water wont stop circulating. If the temperature sensor has failed, the display will show fault code 8 immediately and testing will end shortly after water has started circulating.

● Homepage

● Parts Guide

● Troubleshooting

● Bosch Spares

● Hotpoint Spares

● Zanussi Spares

● Indesit Spares

● Beko Spares

● AEG Spares

Homepage Privacy Site Map